Wir freuen uns auf Ihre Kontaktaufnahme! Damit wir Ihre Serviceanfrage zügig bearbeiten können, teilen Sie uns bitte bei jeder Anfrage die Seriennummer und den Typ der Maschine mit.

Boring Rods, Probes, Ram Rods and Accessories

System-Josten

For extracting soil samples, we manufacture impact-type boring rods made of tool steel.
The outsides of these boring rods are conical along their entire length and have a removal slot of 18 or 15 mm. They’re rotated by a toggle and pulled out of the ground.
Because of their physical properties, these tools are suitable for even the most demanding conditions.

Art. No. Article Description Price in EUR*
1001 Boring rod, effective length 1000 mm, total length 1150 mm, slot 18 mm, conical, round 218,40
1001.2 Boring rod, effective length 1000 mm, Marking for boring rods at 10 cm intervals and charmfered cutting edge for boring rods 229,60
1003 Boring rod, effective length 1200 mm, total length 1350 mm, slot 18 mm, conical, round 263,20
1005 Boring rod, effective length 1500 mm, total length 1650 mm, slot 18 mm, conical, round 302,40
1030 Toggle for lifting up and emptying the boring rod, length 300 mm 41,40
1031 Toggle for lifting up and emptying the boring rod, length 600 mm 54,00
1040 1 set of extraction probes (mineralised nitrogen boring spares) for three depths. Each borer consists of an extraction probe, an extension and the impact head with transverse borehole. The extraction probe is conical from 0 to 30 cm from a Ø of 40-38 mm. The extraction probe is conical from 30 to 60 cm from a Ø of 35 to 33 mm. The extraction probe is conical from 60 to 90 cm from a Ø of 30-28 mm. This results in no frictional resistance when extracting soil samples. All parts are made of hardened tool steel and highly durable. These tools have been designed for especially hard ground. 716,80
1041 Probe, effective length 0-30 cm, outside Ø 40-38 mm, conical 154,60
1042 Extension for the 0-30 cm probe 44,80
1043 Probe, effective length 30-60 cm, outside Ø 35-33 mm, conical 154,60
1044 Extension for the 30-60 cm probe 444,80
1045 Probe, effective length 60-90 cm, outside diameter 30-28 mm, conical 154,60
1046 Extension for the 60-90 cm probe 44,80
1049 Impact head with transverse borehole 58,30
1050 Impact rod with shrunken impact head for extracting soil samples up to 2 m deep, Ø 15 mm, slot 8x8 mm. The impact rod is used with the impact boring rod NL 1000 (Art. No. 1001). 274,40
1051 Chisel for scraping off and clearing the soil sample, 18 mm, round 20,20
1052 Chisel for scraping off and clearing the soil sample, 15 mm, round 20,20
1053 Chisel for scraping off and clearing the soil sample, 15 mm, square 20,20
1054 Chisel for scraping off and clearing the soil sample, 8 mm, square 20,20
1055 Chisel for scraping off and clearing the soil sample, 12 mm, square 20,20
1060 Impact-Lifting-Combination for impact boring and ram rods 2 m (square hammer, draw hook and draw ring). Hammer impact area 135x135 mm, 200 mm long, weight approx. 4300 g. The hammer shaft is made of plastic and is flattened and has milled holding grooves for the draw ring over its entire length. The draw hook is used as a toggle, lifting rod and for clearing the slot. At the end of the hammer shaft there is a milled slot that can be used as a boring rod support while cleaning. 358,40
1061 Square hammer, complete 196,00
1064 Draw ring 39,20
1065 Draw hook 132,20
1085 Stainless steel soil probe for locating compacted earth, ground layers. Effective length 1000 mm with marks at 100 mm intervals, 8 mm Ø. 68,30

*All prices are without applicable taxes or VAT, shipping and packaging not included.